ICETEK-F28377D-KB core board_北京瑞泰创新伟业信息技术有限公司

MCU /

Product details

★ Product description:

ICETEK-F28377D-KB V3, the minimum core board based on TI dual-core Delfinotm microcontroller, is a dual real-time control 32-bit floating-point microcontrol core board designed for industrial drive and servo motor control, solar inverter and converter, digital power supply, power transmission and power line communication and other advanced closed-loop control applications.The superior system performance of the on-board main processor reduces costs by eliminating the need for multiple processors in high-end systems.At the same time, it has a 70mm(L)×55mm(W) overall size, up to 200 pin processor expansion interface and independent 14PIN simulation interface, convenient designers to develop and use, speed up the product time to market.

★ Product features:

1. Main processor: TMS320F28377DZWTT

- Dual-core architecture: two TMS320C28X 32-bit CPUs, 200MHz

- Two programmable control law accelerators (CLA) : 200MHz, executing code independently of the main CPU

- On-chip memory:

· 512KB (256KW) or 1MB (512KW) flash memory (ECC protection)

· 172KB (86kW) or 204KB (102kW) RAM (ECC protection)

· Support third party development of dual-zone security

- 1.2V core, 3.3V I/O design

- System peripherals:

· Two external memory interfaces (EMIF) with ASRAM and SDRAM support

· Dual 6-channel direct memory access (DMA)

· Up to 169 independently programmable reusable general input/output (GPIO) pins supporting input filtering

- Communication peripherals:

· USB2.0 (MAC+PHY)

· Two controller LAN (CAN) modules (pin bootable)

· Three high-speed (up to 50MHz) SIP ports (pin bootable)

· Two multi-channel buffered serial ports (MCBSP)

· Four serial communication interfaces (SCI/UART) (pin bootable)

· Two I2C interfaces (pins can be bootable)

- Simulation subsystem:

· Four ADC Converters

· Eight windowable comparators with 12-bit DAC references

- Enhanced control peripherals:

· 24 pulse width modulator (PWM) channels with enhanced functionality

· 16 high resolution pulse width modulator (HRPWM) channels

★ Hardware interface:

2. main processor extension interface: 100PIN * 2

- Extensible peripheral interface:

· Audio input/output interface

· GPIO extension interface

· LCD module interface

· USB OTG interface

· RS - 232 interface

· RS - 485 interface

· UART interface,

· TF Card interface

· RTC real-time clock

· CAN interface

· 10/100M network interface

· WIFI/GPS/ ZigBee extension interface (modules need to be purchased separately)

- Extensible Peripherals:

· Temperature controller

· Character display

· Buzzer,

(The above interfaces and peripherals are available from the ICETEK-F28377D-KBA Extended Application Board)

3.14PIN JTAG simulation interface, can be connected to the simulator:

- ICETEK-XDS100 V2+

- ICETEK-XDS200U

- ICETEK - XDS560 V2, etc

4. Overall size: 70mm(L)×55mm(W)

Product Interest

Product Model：
Content：
Company Name：
Name：

Phone Number：
Email：

Address：